PRODUCTS CENTER
rwanda NFS-L-8400 Series Addition Liquid Fluorosilicone Rubber
Category:
Product Description
Product Introduction
NFS-L-8400 series two-component addition liquid fluorosilicone rubber has excellent high and low temperature resistance, oil resistance and electrical insulation, and can be used to make oil-resistant rubber products in the automotive industry, aerospace, power and electrical, consumer electronics, wearable products and other fields.
Product Performance
|
Project |
Test Method |
NFS-L-8440 |
NFS-L-8460 |
|
A component color |
visual inspection |
Pale yellow |
Pale yellow |
|
B component color |
visual inspection |
Pale yellow |
Pale yellow |
|
Component A viscosity/Pa.s (shear rate 10 s-1) |
Q/371002WXH028-2016 |
700 |
820 |
|
Component B viscosity/Pa.s (shear rate 10 s-1) |
Q/371002WXH028-2016 |
650 |
770 |
|
After primary vulcanization at 120 ℃ × 10min |
|||
|
Density/g/cm3 |
ASTM D792 |
1.43 |
1.42 |
|
Hardness/Shore A |
ASTM D2240 |
39 |
59 |
|
Tensile strength/MPa |
ASTM D412 |
11.0 |
7.9 |
|
Elongation at break/% |
ASTM D412 |
425 |
235 |
|
Tear strength/kN/m |
ASTM D624-B |
15 |
13 |
|
Resilience/% |
ASTM D1054 |
40 |
41 |
|
Compression set/%(177 ℃× 22h) |
ASTM D395 |
10 |
20 |
|
200 ℃× 4h after secondary vulcanization |
|||
|
Hardness/Shore A |
ASTM D2240 |
40 |
62 |
|
Tensile strength/MPa |
ASTM D412 |
10.8 |
7.2 |
|
Elongation at break/% |
ASTM D412 |
368 |
181 |
|
Tear strength/kN/m |
ASTM D624-B |
14 |
13 |
|
Resilience/% |
ASTM D1054 |
41 |
43 |
|
Compression set/%(177 ℃× 22h) |
ASTM D395 |
4 |
6 |
|
oil resistance |
|||
|
Right III/%(125℃x168h) |
ASTM D471 |
1.1 |
1.2 |
|
IRM903/%(150 ℃× 168h) |
ASTM D471 |
2.2 |
2.0 |
|
RME Biodiesel/%(40℃×168h) |
ASTM D471 |
3.1 |
3.2 |
|
Fuel F Diesel/%(40℃×168h) |
ASTM D471 |
3.3 |
2.4 |
|
Fuel C/%（60℃×168h） |
ASTM D471 |
22.2 |
20.5 |
|
FAM B/%（60℃×168h） |
ASTM D471 |
28.8 |
28.0 |
|
Jet Fuel No.3/%（23℃×168h） |
ASTM D471 |
4.9 |
5.1 |
Vulcanization conditions:
The vulcanization time of NFS-L-8440 liquid fluorosilicone rubber depends on the vulcanization temperature and the thickness and size of the vulcanized product. When the vulcanized product is heated to 120 ℃, it can be quickly vulcanized within a few seconds. The rate can be optimized according to the size of the part. It is recommended that the vulcanization conditions are 120 ℃ × 10min for primary vulcanization and 200 ℃ × 4h for secondary vulcanization. Please adjust the vulcanization time according to the actual production process.
Packing:
Plastic drum packaging, A/B components each 20kg separate packaging.
Storage period:
Store in a cool and dry environment, unopened original packaging storage period of 12 months.
Note:
Avoid contact with compounds containing nitrogen, sulfur, phosphorus, heavy metals and other elements, so as not to cause the product to be vulcanized or not vulcanized.
Focus on us
Mobile website