PRODUCTS CENTER
chad Medium hardness series KHX7040 & KHX7055 & KHX4043
Category:
Product Description
Product Introduction
This series of products are suitable:
1. Supercritical media bead foaming and steam forming process.
2. It is suitable for the preform foaming process of EVA blending.
3. It is suitable for the foaming process of the parison after the pure material injection molding.
Foamed parts have the characteristics of low density, high strength and high elasticity.
 |
 |
 |
 |
Table of Physical Property TDS
|
Inspection Items |
Indicators |
||
|
KHX7040 |
KHX7055 |
KHX4043 |
|
|
Appearance |
Colorless or light yellow transparent particles |
Colorless or light yellow transparent particles |
Colorless or light yellow transparent particles |
|
Density, g/cm3 |
1.01-1.02 |
1.01-1.02 |
1.01 |
|
Moisture,% |
＜0.10 |
＜0.10 |
＜0.10 |
|
Hardness, Shore D |
40 |
55 |
40 |
|
Melting temperature, ℃ |
162-163 |
178-179 |
150-151 |
|
Melt Index, g/10min |
3.0-15.0 (adjustable) |
3.0-15.0 (adjustable) |
3.0-15.0 (adjustable) |
|
Tensile strength, MPa |
＞25.0 |
＞35.0 |
＞30.0 |
|
Elongation at break,% |
＞600 |
＞400 |
＞600 |
|
Right angle tear strength, KN/m |
115-120 |
170-175 |
120-125 |
* The data in the table are typical values measured in the laboratory and are not used as factory standards for product performance.
Product packaging:
This product is a non-dangerous goods, aluminum foil bag packaging, 25kg per bag, can also be based on demand to determine the packaging specifications.
Product storage:
1, suitable for storage in a cool and dry environment.
2. The product is waterproof packaging, please open the packaging before use, please seal the packaging in time if the material is not used up.
3. Affected by water absorption, it is recommended that the material be stored for more than three months after drying at 60-70°C.
Focus on us
Mobile website