PRODUCTS CENTER
Eritrea NFS9500 series adhesive fluorosilicone rubber
Product Description
Product Introduction
This product is suitable for the production of automotive turbocharger hose or other composite hose and other products.
Excellent calendering properties, and silicone rubber co-vulcanization bonding properties
Excellent oil resistance, solvent resistance.
Technical indicators
|
Item
|
Indicators |
||||
|
No. |
NFS9540 |
NFS9550 |
NFS9560 |
NFS9561 |
|
|
Appearance Test Method |
Pale yellow |
||||
|
Density/g/cm3 |
ASTM D792 |
1.40 |
1.41 |
1.42 |
1.44 |
|
Hardness/shoreA |
ASTM D2240 |
41 |
50 |
60 |
61 |
|
Tensile strength/MPa |
ASTM D412 |
9.5 |
9.8 |
10.2 |
9.8 |
|
Elongation at break/% |
ASTM D412 |
370 |
282 |
263 |
310 |
|
Tear strength/KN/m |
ASTM D624-B |
17 |
17 |
18 |
17 |
|
* Heat resistance |
Hardness change |
4 |
2 |
2 |
2 |
|
Tensile strength |
-24 |
-25 |
-23 |
-26 |
|
|
Elongation at break |
-19 |
-10 |
-14 |
-12 |
|
|
Fuel C |
ASTM D471 |
23 |
23 |
21 |
21 |
|
Peel strength/N/mm, with methyl vinyl silicone rubber |
2.0 |
2.0 |
2.2 |
2.0 |
|
|
vulcanization conditions |
Add 0.8 parts of dipteris and vulcanize for 120 ℃× 15min in one stage and 200 ℃× 4h in the second stage. |
||||
* The data in the table is the typical performance of the product and is not used as the factory standard.
* To meet the heat-resistant requirements need to add heat-resistant additives
Method of use:
It is recommended to use 0.8-1.0 parts of ditetrakis (bis (2,4-dichlorobenzoyl) DCBP) vulcanizing agent.
The customer should determine the most suitable curing temperature and time according to the product size and curing method.
Product packaging:
This product is non-dangerous goods, carton packaging, plastic bags, ten kilograms per bag, two bags per box.
Storage period:
This product has a cold flow, transport and use should avoid damage to the packaging bag.
Store in a cool and dry environment, shelf life of 12 months.
Focus on us
Mobile website