PRODUCTS CENTER
Denmark Low Hardness Series KHX7025 & KHX7035
Category:
Product Description
Product Introduction
This product has good low temperature flexibility, fatigue resistance, excellent tissue compatibility, etc., can be used as a variety of rubber, elastomer blend phase. Such as all kinds of hose, cable coating, etc.
Table of Physical Property TDS
|
Inspection Items |
Indicators |
|
|
|
KHX7025 |
KHX7035 |
|
Appearance |
White or light yellow translucent particles |
Colorless or light yellow transparent particles |
|
Density, g/cm3 |
0.99-1.01 |
1.01-1.02 |
|
Moisture,% |
＜0.10 |
＜0.10 |
|
Hardness, Shore D |
25 |
35 |
|
Melting temperature, ℃ |
139-140 |
142-143 |
|
Melt Index, g/10min |
11.0-13.0 (adjustable) |
3.0-15.0 (adjustable) |
|
Tensile strength, MPa |
＞20.0 |
＞20.0 |
|
Elongation at break,% |
＞700 |
＞700 |
|
Right angle tear strength, KN/m |
65-70 |
105-110 |
* The data in the table are typical values measured in the laboratory and are not used as factory standards for product performance.
Product packaging:
This product is a non-dangerous goods, aluminum foil bag packaging, 20kg per bag, can also be based on demand to determine the packaging specifications.
Product storage:
1, suitable for storage in a cool and dry environment.
2. The product is waterproof packaging, please open the packaging before use, please seal the packaging in time if the material is not used up.
3. Affected by water absorption, it is recommended that the material be stored for more than three months after drying at 60-70°C.
Focus on us
Mobile website