PRODUCTS CENTER
Denmark High Hardness Series KHX7063 & KHX7072
Category:
Product Description
Product Introduction
This series of products have good transparency, mechanical properties and low temperature weather resistance. Suitable for various injection parts and medical catheters.
 |
 |
Table of Physical Property TDS
|
Inspection Items |
Indicators |
|
|
|
KHX7063 |
KHX7072 |
|
Appearance |
Colorless or light yellow transparent particles |
Colorless or light yellow transparent particles |
|
Density, g/cm3 |
1.01-1.02 |
1.01-1.02 |
|
Moisture,% |
＜0.10 |
＜0.10 |
|
Hardness, Shore D |
63 |
72 |
|
Melting temperature, ℃ |
182-183 |
185-186 |
|
Melt Index, g/10min |
3.0-20.0 (adjustable) |
3.0-20.0 (adjustable) |
|
Tensile strength, MPa |
＞45.0 |
＞50.0 |
|
Elongation at break,% |
＞300 |
＞300 |
|
Right angle tear strength, KN/m |
185-190 |
210-215 |
* The data in the table are typical values measured in the laboratory and are not used as factory standards for product performance.
Product packaging:
This product is a non-dangerous goods, aluminum foil bag packaging, 25kg per bag, can also be based on demand to determine the packaging specifications.
Product storage:
1, suitable for storage in a cool and dry environment.
2. The product is waterproof packaging, please open the packaging before use, please seal the packaging in time if the material is not used up.
3. Affected by water absorption, it is recommended that the material be stored for more than three months after drying at 60-70°C.
Focus on us
Mobile website