NFS9700 series extruded fluorosilicone rubber
This product is suitable for double two four vulcanization extrusion molding. Has excellent oil resistance, solvent resistance, acid and alkali resistance.
Classification:
High temperature curing fluorosilicone rubber
Product Consulting
Please contact us to provide you with satisfactory products and become a reliable supplier and service provider in the industry.
Fluorosilicone Rubber Business
Fluorosilicone Rubber Products
NFS9700 series extruded fluorosilicone rubber
This product is suitable for double two four vulcanization extrusion molding. Has excellent oil resistance, solvent resistance, acid and alkali resistance.
Classification:
High temperature curing fluorosilicone rubber
Product Introduction
This product is suitable for double two four vulcanization extrusion molding.
Has excellent oil resistance, solvent resistance, acid and alkali resistance.
Technical indicators
|
Item
|
Indicators |
||
|
No. |
NFS9760 |
NFS9770 |
|
|
Appearance Test Method |
Translucent, smooth surface, No impurities |
||
|
Density/g/cm3 |
ASTM D792 |
1.44 |
1.48 |
|
Hardness/shoreA |
ASTM D2240 |
60 |
70 |
|
Tensile strength/MPa |
ASTM D412 |
10.5 |
10.1 |
|
Elongation at break/% |
ASTM D412 |
207 |
201 |
|
Tear strength/KN/m |
ASTM D624-B |
18 |
17 |
|
* Heat resistance |
Hardness change/A |
4 |
5 |
|
Change rate of tensile strength/% |
-27 |
-24 |
|
|
Change rate of elongation/% |
-26 |
-23 |
|
|
Fuel C |
ASTM D471 |
21 |
20 |
|
IRM903 |
ASTM D471 |
4.5 |
4 |
|
PH of nitric acid/sulfuric acid/hydrochloric acid mixed solution <1 100 ℃× 120h |
|||
|
Acid resistance |
ASTM D471 |
0.3 |
0.3 |
|
3% sodium hydroxide aqueous solution 60 ℃ × 72h |
|||
|
Alkali resistance |
ASTM D471 |
0.4 |
0.3 |
|
vulcanization conditions |
0.8 parts of double -24, one-stage vulcanization: 120 ℃× 15min, two-stage vulcanization: 200 ℃× 4h |
||
* The data in the table is the typical performance of the product and is not used as the factory standard.
* To meet the heat-resistant requirements need to add heat-resistant additives
Method of use:
It is recommended to use 0.8-1.0 parts of ditetrakis (bis (2,4-dichlorobenzoyl) DCBP) vulcanizing agent.
The customer should determine the most suitable curing temperature and time according to the product size and curing method.
Product packaging:
This product is non-dangerous goods, carton packaging, plastic bags, ten kilograms per bag, two bags per box.
Storage period:
This product has a cold flow, transport and use should avoid damage to the packaging bag.
Store in a cool and dry environment, shelf life of 12 months.
Key words:
Previous Page
Previous Page
Next Page
Can't find the product you need?
If you are interested in our products, please leave your email, we will contact you as soon as possible, thank you!
Other Products
We decide the quality of the pros and cons · Quality determines the user's choice
Brief Introduction of Rubber Products Division
Rubber Products Division focuses on the research and development, production and sales of rubber products. We are committed to providing customers with high-quality and reliable rubber products solutions.
To undertake a variety of standard and non-standard size O-rings, X-rings, samples to map processing customization, material fluorosilicone rubber (FVMQ) and other.
To undertake a variety of rubber parts, sample to map processing custom..
The use of high-efficiency reaction technology can reduce inventory, increase production capacity, improve reaction selectivity, enhance mass transfer and heat transfer rate, and meet the safety, health and environmental protection requirements of chemical enterprises.
The entry threshold of domestic chemical equipment manufacturing is very low, there are too many small and medium-sized chemical machinery factories, and too many products are of low quality. Recently, many chemical plants have frequent safety accidents, which are also the result of vicious competition in recent years.
Quick-open high-pressure supercritical foaming kettle
At present, supercritical foaming technology is common in the application of shoe materials. Almost all major sports brands have launched supercritical foaming shoes, such as Anta, Li Ning, Tebu, Zhongqiao Sports, Peak, 361, Adidas, Nike, Hongxingerke, Huili, etc. Various nitrogen-supported midsole technologies emerge one after another.
This product belongs to the non-dangerous goods, is a kind of olefin resin (olefin and maleic anhydride alternating copolymerization of polymer) class aldehyde-free adhesive, can be used as wood adhesive, prepared with high bonding strength, no formaldehyde release of environmental protection plate, product performance is excellent, mainly suitable for blockboard, wood floor, solid wood multilayer board and other plate types.
NFS7100 series methyl fluorosilicone oil
NFS7100 series methyl fluorosilicone has good oil resistance, solvent resistance, hydrophobicity and lubricity, and can be used to make grease, high-voltage cable insulation grease and textile printing and dyeing industry defoaming agent and fabric finishing agent.
Focus on us
Mobile website